Brother International HL 1230 Users Manual - English - Page 67
This printer can accept memory SIMM with the following, specifications, Speed, Pin type, Height
View all Brother International HL 1230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
CHAPTER 4 OPTIONS This printer can accept memory SIMM with the following specifications: Speed 60 nsec - 80 nsec Pin type 72 pin Height 25.4 mm (1.00") or less Output 32 bit or 36 bit ✏ Note y Additional memory is useful and may be necessary if you are using the Page Protection function. (For HL-1440 users) y The resident memory of HL-1440 printer is 2 MB, you need to expand the printer memory by adding a SIMM to print at 1200 dpi. (For HL-1470N users) y You have to expand the printer memory by adding a SIMM to use the FTP/IPP protocol. ✏ Note The printer has only one slot for a SIMM upgrade. If you want to increase your printer memory again after you have already installed a SIMM module in the slot, you will need to remove the previously installed SIMM. 4-3