Brother International HL-1260 Service Manual - Page 62

1.20 Tray Sensor Holder (1) Disengage the DU (Duplex) detection actuator from the hook and slide it to the outside. (2) Loosen the screw and remove the holder by lifting it from the chassis. PE sensor actuator tray, PE actuator link, DU detection actuator 1) Remove the PE actuator link from the PE sensor actuator tray. 2) Remove the PE actuator link from the tray sensor holder. 3) Remove the PE sensor actuator tray from the tray sensor holder. 4) Remove the DU detection actuator from the tray sensor holder. DU detection actuator Screw PE actuator link Hook PE sensor actuator tray Tray sensor holder Figure 4.32 1.21 Roller Holder (1) Remove the gear 28. (2) Loosen and pull out the 2 screws. Roller holder Gear 28 Figure 4.33 IV - 14 Screws