Brother International HL-2230 Users Manual - English - Page 97
Cleaning the paper pick-up roller, power outlet.
View all Brother International HL-2230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Routine Maintenance l Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn on the machine's power switch. Cleaning the paper pick-up roller 4 If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller as follows: a Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC power outlet. 4 b Pull the paper tray out of the machine. c Remove all the paper, and anything that is stuck inside, from the paper tray. d Tightly wring out a lint-free cloth soaked in lukewarm water, and then in the paper tray wipe the separator pad (1) to remove any dust. 1 93
Routine Maintenance
93
4
l
Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn
on the machine's power switch.
Cleaning the paper pick-up roller
4
If the paper pick-up roller is dirty, the machine may not feed paper. In that case, clean the paper pick-up roller
as follows:
a
Turn off the machine's power switch. Disconnect all cables, and then unplug the power cord from the AC
power outlet.
b
Pull the paper tray out of the machine.
c
Remove all the paper, and anything that is stuck inside, from the paper tray.
d
Tightly wring out a lint-free cloth soaked in lukewarm water, and then in the paper tray wipe the separator
pad (1) to remove any dust.
1