Brother International HL 5170DN Network Users Manual - English - Page 106
Using ARP to Con the Print Server IP Address, TCP/IP CONFIGURATION 10 - 6
UPC - 012502612667
View all Brother International HL 5170DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Using ARP to Configure the Print Server IP Address If you are unable to use the BRAdmin application or the printer's control panel (if applicable) and your network does not use a DHCP server, you can also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP installed as well as Unix systems. To use arp enter the following command at the command prompt: arp -s ipaddress ethernetaddress Where ethernetaddress is the Ethernet address (MAC address) of the print server and ipaddress is the IP address of the print server. For example: Windows® System Tipically, Windows® System requires the hyphen "-" character between each digit of the Ethernet address. arp -s 192.189.207.2 00-80-77-31-01-07 Unix/Linux Systems Tipically, Unix and Linux Systems require the colon ":" character between each digit of the Ethernet address. arp -s 192.189.207.2 00:80:77:31:01:07 TCP/IP CONFIGURATION 10 - 6