Brother International HL 5170DN Network Users Manual - English - Page 66
Configuring NetWare 3 and NetWare 4 Systems
UPC - 012502612667
View all Brother International HL 5170DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4 Enter the name you wish the Printer Agent to be referred to by, and select Novell Printer Gateway for the Gateway type and click OK. 5 Select None for the printer Type, and Novell Port Handler for the Port Handler Type. Then click OK. 6 You must now specify the type of connection that you are going to use. There are four possible options. Select the LPR over IP option. 7 Enter the relevant details of the printer and Brother recommends typing Binary_P1 for the printer name. Click finish and wait. Select the printer drivers for the client operating systems. You are now ready to print. Configuring NetWare 3 and NetWare 4 Systems Brother's BRAdmin application provides similar functionality to the NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 4.1x or later). To use the BRAdmin application to configure a Brother print server under NetWare, make sure that you are logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or later) and perform the appropriate steps as detailed in the following pages. You must install the Novell NetWare Client 32 if you wish to create queue information on your NetWare servers by BRAdmin. Configuring the Brother Print Server (Queue Server Mode in Bindery Emulation Mode) Using BRAdmin 1 Make sure that you logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.xx or later). 2 Start BRAdmin. NOVELL NETWARE PRINTING 6 - 6