Brother International HL-L2340DW Drum Unit Replacement Guide - Page 4
Reset The Drum Unit Counter, Setzen Sie Den ZÄhler Der Trommeleinheit Zurück, RÉinitialisez Le
View all Brother International HL-L2340DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
6 [ English ] RESET THE DRUM UNIT COUNTER Make sure the machine is turned on. (1) Make sure that the front cover is open. (2)Press and hold Go for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go. (3)Close the front cover. (4) Make sure the Drum LED is now off. (1) Make sure that the front cover is open. (2)Press and hold OK for about two seconds to display Drum Unit, and then press OK. (3)Press a to display Reset and reset the drum counter. (4) Close the front cover. (1) Make sure that the front cover is open. (2)Press and hold OK for about two seconds to display Replace Drum?. (3)(DCP models) Press a to reset the drum counter. (MFC models) Press 1 to reset the drum counter. (4) Close the front cover. (1) Close the front cover. (2)Press to interrupt the error. (3)Press (Settings) > All Settings > Machine Info. > Parts Life. (4) Press # until the Touchscreen message changes. (5)Press Drum, and then press Yes. (6)Press . Finish Go to http://www.brother.com/original/index.html for instructions on how to return your used supplies to the Brother collection program. If you choose not to return your used supply, please discard the used supply according to local regulations, keeping it separate from domestic waste. If you have questions, call your local waste disposal office. 6 [ Deutsch ] Setzen Sie den ZÄHLER DER TROMMELEINHEIT zurück Stellen Sie sicher, dass das Gerät eingeschaltet ist. (1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist. (2)Halten Sie Go (Los) ca. vier Sekunden lang gedrückt, bis alle LEDs aufleuchten. Wenn alle vier LEDs leuchten, lassen Sie Go (Los) wieder los. (3)Schließen Sie die vordere Abdeckung. (4) Stellen Sie sicher, dass die Drum (Trommel)-LED nun aus ist. (1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist. (2)Halten Sie OK ungefähr zwei Sekunden lang gedrückt, bis Trommel angezeigt wird. Drücken Sie dann OK. (3)Drücken Sie a, um Reset anzuzeigen, und setzen Sie dann den Trommelzähler zurück. (4) Schließen Sie die vordere Abdeckung. (1) Stellen Sie sicher, dass die vordere Abdeckung geöffnet ist. (2)Halten Sie OK ungefähr zwei Sekunden lang gedrückt, um Trommel ersetzt? anzuzeigen. (3)(DCP-Modelle) Drücken Sie a, um den Trommelzähler zurückzusetzen. (MFC-Modelle) Drücken Sie 1, um den Trommelzähler zurückzusetzen. (4) Schließen Sie die vordere Abdeckung. (1) Schließen Sie die vordere Abdeckung. (2)Drücken Sie , um den Fehler zu abzubrechen. (3)Drücken Sie (Einstell.) > Alle Einstell. > Geräte-Info > Teilelebensdauer. (4) Drücken Sie #, bis sich die Meldung im Touchscreen-Display ändert. (5)Drücken Sie Trommel, und drücken Sie dann Ja. (6)Drücken Sie . Fertig Unter http://www.brother.com/original/index.html finden Sie Anweisungen, wie Sie die Verbrauchsmaterialien im Rahmen des Brother Recyclingprogramms zurücksenden können. Wenn Sie sich gegen die Rücksendung der Verbrauchsmaterialien entscheiden, entsorgen Sie die Verbrauchsmaterialien gemäß den örtlichen Bestimmungen getrennt vom normalen Hausmüll. Wenn Sie Fragen haben, wenden Sie sich an Ihren örtlichen Wertstoffhof. 6 [ Français ] RÉINITIALISEZ LE COMPTEUR DU TAMBOUR Assurez-vous que l'appareil est sous tension. (1) Assurez-vous que le capot avant est ouvert. (2)Appuyez sur la touche Go (Démarrer) et maintenez-la enfoncée pendant environ 4 secondes jusqu'à ce que les DEL s'allument. Une fois les 4 DEL allumées, relâchez la touche Go (Démarrer). (3)Fermez le capot avant. (4) Assurez-vous que la DEL Drum (Tambour) est maintenant éteinte. (1) Assurez-vous que le capot avant est ouvert. (2)Maintenez la touche OK enfoncée pendant environ deux secondes pour afficher l'option Tambour, puis appuyez sur OK. (3)Appuyez sur a pour afficher Init. et remettre le compteur du tambour à zéro. (4) Fermez le capot avant. (1) Assurez-vous que le capot avant est ouvert. (2)Maintenez OK enfoncé pendant deux secondes environ pour afficher Changer tambour?. (3)(Modèles DCP) Appuyez sur a pour remettre le compteur du tambour à zéro. (Modèles MFC) Appuyez sur 1 pour remettre le compteur du tambour à zéro. (4) Fermez le capot avant. (1) Fermez le capot avant. (2)Appuyez sur pour mettre fin à l'erreur. (3)Appuyez sur (Réglages) > Ts params > Info. appareil > Durée de vie des pièces. (4) Appuyez sur # autant de fois que nécessaire pour changer le message affiché sur l'écran tactile. (5)Appuyez sur Tambour, puis sur Oui. (6)Appuyez sur . Terminer Voir http://www.brother.com/original/index.html pour savoir comment retourner vos consommables usagés dans le cadre du programme de collecte Brother. Si vous ne renvoyez pas votre consommable, mettez-le au rebut conformément aux réglementations locales en vigueur, en le séparant des ordures ménagères. Si vous avez des questions, appelez les autorités locales compétentes en la matière. - 3 -