Brother International HS-2500 Users Manual - English - Page 28
foot, and then pull out about 5 cm 2 inches
View all Brother International HS-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
KNOWING YOUR SEWING MACHINE Fully lower the needle threader lever. d Pull the loop of the thread passed through the g eye of the needle toward the rear of the machine. X The end of the needle threader rotates toward you and the hook passes through the eye of the needle. Catch the thread on the hook as shown below. e a Loop of thread CAUTION ● Be careful not to pull on the thread with force or it may bend the needle. ● If the thread does not pass through the eye of the needle, start from step c again. Raise the presser foot lever. h a Hook b Thread While lightly holding the thread, release the f needle threader lever. The hook will pull the thread through the needle. a Presser foot lever Pass the end of the thread through the presser i foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine. a 5 cm (2 inches) Note ● If you incorrectly feed the thread you may cause sewing problems. 26