Brother International Innov-is 1200 Users Manual - English - Page 66
Sewing thin fabrics, Sewing stretch fabrics, Sewing leathers or vinyl, fabrics, Sewing an even seam
View all Brother International Innov-is 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
SEWING BASICS Sewing thin fabrics When sewing thin fabrics, the stitching may become misaligned or the fabric may not feed correctly. If this occurs, place thin paper or stabilizer material under the fabric and sew it together with the fabric. When you have finished sewing, tear off any excess paper. 1 a Stabilizer material or paper Sewing stretch fabrics First, baste the pieces of fabric together, and then sew without stretching the fabric. 1 a Basting Besides, using the stretch stitching or the thread for knits gives an attractive finishes. Sewing leathers or vinyl fabrics When sewing the fabrics that may stick to the presser foot such as leathers or coated fabrics, change the presser foot to the non stick foot. Sewing an even seam allowance To sew an even seam, start sewing so that the seam allowance is to the right of the presser foot, and the edge of the fabric is aligned with either the right edge of the presser foot or a marking on the needle plate. ■ Aligning the fabric with the presser foot Sew while keeping the right edge of the presser foot a fixed distance from the edge of the fabric. 1 2 a Seam b Presser foot ■ Aligning the fabric with the stitch guide foot Sew while keeping the right edge of the fabric aligned with a desired position of markings on the stitch guide foot. 1 2 3 a Seam b Stitch guide foot c Markings 1 a Leather 64