Brother International Innov-is 6000D Operation Manual - Page 220
Confirming The Pattern Position
View all Brother International Innov-is 6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. Using the Built-In Camera to Align the Embroidering Position The embroidering position can easily be aligned using the machine's built-in camera and the included embroidery positioning sticker. a Affix the embroidery positioning the location in the fabric to be sticker to embroidered. Place the embroidery positioning sticker so that the center of the larger circle is at the center of the embroidery pattern. Note • When embroidery frame (small) is installed, the built-in camera cannot be used to align the embroidering position. Install embroidery frame (medium) or a larger embroidery frame. a Embroidery positioning sticker b Center of the embroidery pattern c Embroidery field Note • When inserting the fabric in the embroidery frame, check that the embroidery pattern fits within the embroidery field for the frame that is used. a Embroidery field b Embroidery pattern c Embroidery positioning sticker • Depending on the type of fabric that is used, a part of the embroidery positioning sticker may remain attached when it is peeled off. Before using the embroidery positioning sticker, check that it can be cleanly removed from a scrap piece of the fabric to be used. 206