Brother International LS2-F52A Instruction Manual - English - Page 5

4. INSTALLATION 4. INSTALLATION A CAU®TIO• N • The sewing machine should only be in- ® stalled by a qualified technician. Do not connect the power cord until installation is complete, otherwise the machine • Ask your Brother dealer or a qualified electrician for any electrical work that may need will operate if the treadle is pressed by mistake, which could result in injury. to be done. Be sure to connect the ground. If the ground • The sewing machine weights more than 29 kg. The installation should be carried out by connection is not secure, serious electric shocks will result. two or more people. CI • Install the belt guard to the machine head. 4-1. Installing the rubber hinge and the corner rubber 1. Install the rubber hinge 0 on the table with nails ©.(Two places) 4 2. Install the corner rubber 0 at the four corners of the table with nails 0. 4-2. Installing the oil pan 0 30mm Fit oil pan 0 into the opening in the table, and secure it with 4 nails O. (Refer to the work table processing diagram on page 2.) 4-3. Installing the machine head ii 1. Insert the two bed hinge connections 0 into the holes in the machine bed. 2. Fit the bed hinge connection 0 to the rubber hinge 0 and then place the machine head onto the cor- ner rubber 0. 3. Tap the head rest 0 into the table hole. NOTE: Tap the head rest securely into the table hole. If the head rest is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back. 3 LS2-F52A