Brother International LS2300PRW Users Manual - English and Spanish - Page 21
Removing the presser foot, holder
View all Brother International LS2300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Raise the presser foot lever to check that the g presser foot is securely attached. ■ Attaching the presser foot holder Align the presser foot holder with the lower- a left side of the presser bar. 1 Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder. Use a coin to remove the presser foot holder. ■ Removing the presser foot holder Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 19). Use a coin to loosen the presser foot holder b screw. a Presser foot holder b Presser bar Hold the presser foot holder in place with b your right hand, and then tighten the screw using a coin in your left hand. a Coin b Presser foot holder c Presser foot holder screw a Coin b Presser foot holder c Presser foot holder screw Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. 20