Brother International LS2300PRW Users Manual - English and Spanish - Page 34

Zipper Insertion

Page 34 highlights

UTILITY STITCHES ZIPPER INSERTION You can use the zipper foot "I" to sew different types of zippers, and can easily position it to the right or left side of the needle. When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot. When sewing the left side of the zipper, attach the shank to the right pin of the zipper foot. Stitch width Stitch length Needle position Presser foot Needle 0 2-3 M Zipper foot Single Sew from the bottom of the zipper toward the c top on both sides. The needle should be positioned on the zipper side of the foot for best results. a Zipper foot "I" b Right pin for sewing the left side of the zipper c Left pin for sewing the right side of the zipper Lower the presser foot lever and fix either the a left or right pin of the zipper foot onto the shank. Fold the edge of the fabric 2 cm (3/4 inches) b and place the zipper under the folded section. Lower the needle into the notch located either on the left or right side of the zipper foot. CAUTION ● Turn the handwheel by hand to make sure the needle does not hit the presser foot before you start sewing. If you choose a different stitch, the needle will hit the presser foot and break the needle. You may also be injured. To sew the opposite side of the zipper, release d the foot by pressing the button located at the back of the presser foot, fit the zipper foot on the other side of the zipper and continue sewing using the other side notch. CAUTION ● Make sure the needle does not hit the zipper during sewing. If the needle hits the zipper, the needle may break and you may be injured. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

UTILITY STITCHES
——————————————————————————————————————————————————
33
ZIPPER INSERTION
You can use the zipper foot “I” to sew different types of zippers, and can easily position it to the right or left side
of the needle.
When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot. When sewing the left
side of the zipper, attach the shank to the right pin of the zipper foot.
a
Zipper foot “I”
b
Right pin for sewing the left side of the zipper
c
Left pin for sewing the right side of the zipper
a
Lower the presser foot lever and fix either the
left or right pin of the zipper foot onto the
shank.
b
Fold the edge of the fabric 2 cm (3/4 inches)
and place the zipper under the folded section.
Lower the needle into the notch located either
on the left or right side of the zipper foot.
c
Sew from the bottom of the zipper toward the
top on both sides. The needle should be
positioned on the zipper side of the foot for
best results.
d
To sew the opposite side of the zipper, release
the foot by pressing the button located at the
back of the presser foot, fit the zipper foot on
the other side of the zipper and continue
sewing using the other side notch.
Stitch width
0
Stitch length
2-3
Needle position
M
Presser foot
Zipper foot
Needle
Single
Turn the handwheel by hand to make sure the
needle does not hit the presser foot before
you start sewing. If you choose a different
stitch, the needle will hit the presser foot and
break the needle. You may also be injured.
CAUTION
Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper,
the needle may break and you may be injured.
CAUTION