Brother International MFC 4600 Users Manual - English - Page 89
Error Messages, Change Drum, Check Paper, Press Start, Start, Comm. Error, Connection, Cooling Down - cartridge
UPC - 012502565185
View all Brother International MFC 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error Messages You may occasionally encounter a difficulty with your FAX/MFC or telephone line. If this happens, your FAX/MFC often identifies the problem and displays an error message. The list below explains the most common error messages. You can correct most problems yourself. If you need additional help, call the Brother Fax-Back System at USA: 1-800-521-2846 From within Canada:1-800-681-9838 ERROR MESSAGE CAUSE ACTION CHANGE DRUM SOON The drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. CHECK PAPER PRESS START KEY The FAX/MFC is out of Refill the paper or paper or paper is not remove the paper and properly loaded in the load it again and then multi-purpose sheet feeder. press Start. CHECK PAPER SIZE Your Paper Size setting may not be set correctly for the paper you are using (see page 5-5). When you see this error, the reduction ratio automatically will be changed to Auto if you used a fixed reduction ratio (see page 5-4 to 5-5). COMM. ERROR A poor quality phone line caused communications error. Try the call again. CONNECTION FAIL You tried to poll a fax machine that is not in Polled Waiting mode. Verify the other party's polling setup. COOLING DOWN PLEASE WAIT The temperature of the drum unit or toner cartridge is too hot. The FAX/MFC will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the display on the FAX/MFC shows COOLING DOWN and PLEASE WAIT. You must wait and allow the FAX/MFC to resume printing when it is ready. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 11 - 2