Brother International MFC 640CW Network Users Manual - English - Page 39
Gateway
UPC - 012502614036
View all Brother International MFC 640CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Control panel setup 6 Enter the Subnet Mask address. Press OK. 7 Press Stop/Exit. 4 4.Gateway This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network administrator if you are unsure. (For MFC-640CW) 1 (For Wired) Press Menu/Set, 5, 1, 4. (For Wireless) Press Menu/Set, 5, 2, 4. 2 Select 1 to change. Enter the Gateway address. 3 Press Menu/Set. 4 Press Stop/Exit. (For MFC-820CW) 1 Press Menu. 2 Press ▲ or ▼ to select LAN. Press OK. 3 (For Wired) Press ▲ or ▼ to select TCP/IP(Wired). (For Wireless) Press ▲ or ▼ to select TCP/IP(WLAN) Press OK. 4 Press ▲ or ▼ to select Gateway. Press OK. 5 Press ▲ or ▼ to select Change. Press OK. 6 Enter the Gateway address. Press OK. 7 Press Stop/Exit. 4 - 6