Brother International MFC-8460n Users Manual - English - Page 134
Checking if the machine has faxes in its memory, Sending faxes to another fax machine
UPC - 012502617365
View all Brother International MFC-8460n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Checking if the machine has faxes in its memory C If the LCD shows an error message then you can check to see if there are faxes in the machine's memory. a Press Menu, 9, 0, 1. b Do one of the following: If the LCD shows No Data, there are no faxes left in the machine's memory. If the LCD shows Dial & Start, there are faxes in the machine's memory. • You can send the faxes to another fax machine. See Sending faxes to another fax machine on page 120. • You can send the faxes from the machine's memory to your PC. See Sending faxes to your PC on page 120. Note You can send the Fax Journal report to another fax machine by pressing Menu, 9, 0, 2 in a. Sending faxes to another fax machine C If you have not set up your Station ID, you cannot enter fax transfer mode. a Follow a and b in Checking if the machine has faxes in its memory on page 120. b Enter the fax number to which faxes will be sent. c Press Start. Sending faxes to your PC C You can move the faxes from your machine's memory to your PC. a Press Stop/Exit. b Make sure that you have installed MFL-Pro Suite on your PC, and then turn on PC Fax Receiving on the PC. (For details about PC Fax Receive, see Using Brother PC-FAX software (For Windows®) in the Software User's Guide on the CD-ROM.) c Make sure that you have set PC Fax Receive on the machine. (See PC Fax Receive on page 65.) During setup the LCD will ask if you want to send the faxes to your PC. d Do one of the following: To send all faxes to your PC, press 1. To exit and leave the faxes in the memory, press 2. Note If there is an error message on the machine's LCD after the faxes have been sent, disconnect the machine from the power source for several minutes, and then reconnect it. 120