Brother International MFC-9450CDN Users Manual - English - Page 123
Installing extra memory
UPC - 012502622154
View all Brother International MFC-9450CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installing extra memory B a Turn off the machine's power switch. Unplug the telephone line cord. b Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet. c Remove the DIMM covers (1 and 2). 2 1 Options e Hold the DIMM by the edges and align the notches in the DIMM with the protrusions in the slot. Insert the DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). B 1 2 f Put the DIMM covers (2 and 1) back on. 2 1 d Unpack the DIMM and hold it by its edges. CAUTION To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface. g Plug the machine's power cord back into the AC power outlet first, and then connect the interface cable. h Plug in the telephone line cord. Turn on the machine's power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the User Settings List that shows the current memory size. (See Reports on page 70.) 107