Brother International MFC-9460CDN Quick Setup Guide - English - Page 21

Wired Network Macintosh For Wired Network Interface Users (Mac OS X 10.4.11 - 10.6.x) 18 Before you install 19 Install MFL-Pro Suite a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. (For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/.) Note If you want to setup the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and click Downloads on your model page and visit FAQ's for setup instructions. b Remove the protective cap from the LAN connector marked with a symbol. a Put the installation CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. Follow the on-screen instructions. Note It may take a few minutes for installation to complete. c Follow the on-screen instructions until this screen appears. Choose your machine from the list, and then click OK. Windows® Macintosh Wired Network c Connect the network interface cable to the LAN connector and then connect it to a free port on your hub. Note If your machine is not found over the network, confirm your network settings. See Before you install on page 21. d Make sure your machine's power switch is on. 21