Brother International MFC-9840CDW Network Users Manual - English - Page 183
SET IP ROUTER routeraddress, Local> SET IP ROUTER 192.168.1.4, SET IP METHOD STATIC, SHOW IP
UPC - 012502618744
View all Brother International MFC-9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Appendix A 255.0.0.0 for class A networks 255.255.0.0 for class B networks A 255.255.255.0 for class C networks The leftmost group of digits in your IP address can identify the type of network you have. The value of this group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks (e.g.,128.10.1.30), and 192 through 255 for Class C networks (e.g., 192.168.1.4). If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress, where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For example: Local> SET IP ROUTER 192.168.1.4 Type SET IP METHOD STATIC to set the method of IP access configuration to static. To verify that you have entered the IP information correctly, type SHOW IP. Type EXIT or Ctrl-D (i.e., hold down the control key and type "D") to end the remote console session. 173