Brother International MFC-J220 Quick Setup Guide - English - Page 16

USB Macintosh For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) 16 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. b Connect the USB cable to the USB socket marked with a symbol. You will find the USB socket inside the machine as shown below. USB IMPORTANT • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/ • For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. 17 Connect the USB cable IMPORTANT • DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub. • Connect the machine directly to your Macintosh. a Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. c Carefully route the USB cable through the trench and out the back of the machine as shown below and connect the cable to your Macintosh. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur. 16