Brother International MFC-J220 Quick Setup Guide - English - Page 5

4 Install the ink cartridges e Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap a. CAUTION If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. a Make sure that the power is turned on. The LCD shows No Ink Cartridge. b Open the ink cartridge cover a. 1 1 c Remove the green protective part a. 1 Note Do not throw away the green protective part. You will need it if you transport the machine. d Unpack the ink cartridge. Note Make sure you install the Starter Ink Cartridges included with your machine first. f Take care to match the color of the lever a with the cartridge color b, as shown in the diagram below. 1 2 g Install each ink cartridge in the direction of the arrow on the label. 5