Brother International MFC-J430w Quick Setup Guide - English - Page 5
Install the ink cartridges
View all Brother International MFC-J430w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
4 Install the ink cartridges CAUTION If ink gets in your eyes, wash it out with water at once and call a doctor if you are concerned. Note Make sure you install the Starter Ink Cartridges included with your machine first. a Make sure that the power is turned on. The LCD will show No Ink Cartridge. b Open the ink cartridge cover a. d Unpack the ink cartridge. Turn the green release lever on the orange protective packing a clockwise until it clicks to release the vacuum seal. Then remove the orange protective packing a as shown. 1 1 1 c Remove the orange protective part a. 1 Note Do not throw away the orange protective part. You will need it if you transport the machine. IMPORTANT DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash with soap or detergent at once. e Take care to match the color of the lever a with the cartridge color b, as shown in the diagram below. Install each ink cartridge in the direction of the arrow on the label. 1 2 5