Brother International MFC-J5330DW Basic Users Guide - Page 54
Jam Front/Rear, Jam Front, Jam Rear, Jam Manual Feed, Jam Front/Manual, Feed Slot, Repeat Jam XX
View all Brother International MFC-J5330DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Error Message Jam Front/Rear Jam Front Jam Rear Jam Manual Feed Slot Jam Front/Manual Feed Slot Repeat Jam XX Low Temperature Media is Full. No Caller ID No Paper Fed Action Remove the jammed paper. See Related Information: Printer Jam or Paper Jam at the end of this section. If there is a repeat paper jam, try another paper jam clear operation. See Related Information: Remove Paper Scraps at the end of this section. Make sure the paper guides are set to the correct paper size. Make sure the paper support is fully inserted into the machine. See Related Information: Paper is Jammed in the Front of the Machine at the end of this section. Do not put more than one sheet of paper in the manual feed slot at any one time. Wait until the Touchscreen prompts you to load another sheet of paper before you feed the next sheet of paper in the manual feed slot. Clean the paper pick-up rollers. For more information, see the Online User's Guide: Clean the Paper Pick-up Rollers. After warming the room, allow the machine to warm up to room temperature. Try again when the machine has warmed up. Your machine can only save to your USB flash drive if it contains fewer than 999 files. Delete unused files and try again. Delete unused files from your USB flash drive to make some free space, and then try again. There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. To use the Caller ID feature, call your telephone company. For more information, see the Online User's Guide: Caller ID. Do one of the following: • Refill the paper tray, and then follow the LCD instructions. • Remove and reload the paper, and then follow the LCD instructions. The paper was not inserted in the center position of the manual feed slot. Remove the paper and reinsert it in the center of the manual feed slot, and then follow the LCD instructions. See Related Information: Load Paper in the Manual Feed Slot at the end of this section. The Jam Clear Cover is not closed correctly. 40