Brother International MFC440CN Users Manual - English - Page 99
Using your Remote Access Code, Clear/Back, long beep - Fax messages, long beeps - Fax & Voice
UPC - 012502615804
View all Brother International MFC440CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Advanced fax operations (Black & White only) Note You can change your code at any time by entering a new one. If you want to make your code inactive, press Clear/Back in step e to restore the inactive setting (---l) and press OK. Using your Remote Access Code 10 a Dial your fax number from a touch tone telephone or another fax machine. b When your machine answers, enter your remote access code (3 digits followed by l) at once. c The machine signals if it has received messages: 1 long beep - Fax messages 2 long beeps - Voice messages (MFC-665CW and MFC-845CW only) 3 long beeps - Fax & Voice messages (MFC-665CW and MFC-845CW only) No beeps - No messages d When the machine gives two short beeps, enter a command. The machine will hang up if you wait longer than 30 seconds to enter a command. The machine will beep three times if you enter an invalid command. e Press 9 0 to reset the machine when you have finished. f Hang up. Note If your machine is set to Manual mode and you want to use the remote retrieval features, wait about 2 minutes after it starts ringing, and then enter the remote access code within 30 seconds. 10 83