Brother International MFC440CN Quick Setup Guide - English - Page 29
Macintosh, Start Here OSX, Restart - driver mac
UPC - 012502615804
View all Brother International MFC440CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing the Driver & Software Macintosh® 6 Turn on your Macintosh®. 7 Put the supplied CD-ROM into your CD-ROM drive. • Enter a name for your Macintosh® in Display Name up to 15 characters long and click OK. Go to step 10. 8 Double-click the Start Here OSX icon to install. Follow the on-screen instructions. Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software. 9 The Brother software will search for the Brother device. During this time the following screen will appear. • If you want to use the machine's Scan key to scan over the network you must check the Register your computer with the "Scan To" function on the machine box. • The name you enter will appear on the machine's LCD when you press the Scan key and choose a scan option. (For more information, see Network Scanning in the Software User's Guide on the CD-ROM.) 10 Click Add. Macintosh® Network Note • If the machine is configured for your network, choose the machine from the list, and then click OK. This window will not appear if there is only one machine connected on the network, it will be chosen automatically. Go to step 10. Note For Mac OS® X 10.4 users, go to step 13. 11 For Mac OS® X 10.2.4 to 10.3.x users: Make the selection shown below. • If this screen appears click OK. 27