Brother International NX-450 Users Manual - English - Page 125
Changing the pattern length
View all Brother International NX-450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
UTILITY STITCHES Press or (Stitch width keys) until the d desired density is selected. Select for sparse stitching or select for compact stitching. Press or (Stitch length keys) until c is displayed. X The screen for changing the length of a satin stitch appears. Press (OK key) or (Cancel/clear key). e X The initial stitch screen appears again, and the stitching density is changed. CAUTION ● If the stitching density is too compacted, depending on the needle, the stitches may be bunched together, causing the needle to break. Press or (Stitch width keys) until the d desired ratio is selected. The length can be set within the range of and . Changing the pattern length The length of one part of a satin stitch can be set to one of five sizes. Select a satin stitch (No. 32-47 of , a selected with ). • Press to reduce the length. If the key is pressed while the smallest setting (×1) is displayed, a beep sounds. • Press to increase the length. If the key is pressed while the largest setting (×5) is displayed, a beep sounds. Press b panel. (Settings key) in the operation X The settings screen appears. X The satin stitch length is changed. Press (OK key) or (Cancel/clear e key). X The initial stitch screen appears again. 124