Brother International PC 420 Users Manual - English - Page 105
Satin stitching
UPC - 012502541004
View all Brother International PC 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES Satin stitching A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. Connect the foot controller. 1 • For details, refer to "Starting to sew" (page 49). Attach zigzag foot "J". 2 J Press 7 (OK key). X The initial stitch screen appears again. Select stitch 60 . 8 • For details, refer to "Selecting stitching" (page 68). While sewing, slide the sewing speed 9 controller to adjust the stitch width. Slide the controller to the left to make the width narrower. Slide the controller to the right to make the width wider. • For details, refer to "Replacing the presser foot" (page 37). Turn on the sewing machine, and then press 3 (settings key) in the operation panel. X The settings screen appears. Press , , and 4 is selected. (arrow keys) until Narrower Wider Press 5 (OK key). X The screen for specifying that the stitch width can be controlled with the sewing speed controller appears. Press to select . 6 To return to , press . • Adjust the sewing speed with the foot controller. When you are finished sewing, set the stitch 0 width control setting back to OFF. Memo ● Although the stitching result differs depending on the type of fabric being sewn and the thickness of the thread being used, for best results, adjust the stitch length to between 0.3 and 0.5 mm (1/64 and 1/32 inch). X The machine is now set so that the stitch width can be controlled with the sewing speed controller. APPENDIX INDEX Appliqué, Patchwork and Quilt Stitching 99