Brother International PE-170D Users Manual - English - Page 55
Embroidering appliques (using a frame pattern), The finished applique on the project
View all Brother International PE-170D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE ERROR MESSAGE TROUBLESHOOTING Embroidering appliques (using a frame pattern) 1. Select the applique fabric for the project, attach a stabilizer material, place in the embroidery frame and on the machine. 2. Select the frame shape to be embroidered and the "- - -" stitch. Embroider it onto the applique fabric. Remove the fabric from the frame. Cut neatly around the outside of the shape made by the stitches. 3. Attach a stabilizer material onto the back of the fabric on the project where the applique is to be placed. Center the area where the applique is to be placed in the embroidery hoop. Embroider it in the same way using the same frame pattern shape and "- - -" stitch as in step 2. 4. Apply a thin layer of fabric adhesive to the rear of the applique which is created in step 2, and then attach it to the base fabric so that it follows the frame shape just stitched. 1 Adhesive 1 5. Without changing the frame shape or size, select the " " stitch, and use it to embroider the applique material onto the project. 1 Satin stitch " " 1 The finished applique on the project 52 PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL)