Brother International PE-170D Owner's Manual (Español) - Spanish - Page 73
Linking two or more embroidered patterns (using the 90 rotation feature)
View all Brother International PE-170D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
CONTENTS MACHINE KNOWLEDGE EMBROIDERING MAINTENANCE Linking two or more embroidered patterns (using the 90˚ rotation feature) Example: Patterns in Flower card (No. 2) 1. Check the lengths of the patterns you wish to embroider continuously by touching "LAYOUT". If the length is within 18.2 cm (73/16"), you can proceed with embroidering just by changing the embroidery location, without having to re-set the fabric in the frame. 1 Finished appearance 2 Within 18.2 cm (7-3/16") After selecting the pattern, touch "LAYOUT" to check the size of the pattern. The size of the pattern is displayed on the left side on the screen. 2. Draw a line on the fabric marking the place where the patterns will be embroidered. Find the center line, and then draw the line along the whole length of the pattern, marking it off into two even lengths. Mark the embroidery start position with a cross by drawing another line across this line. 1 Embroidery start position 3. Align the line on the fabric with a line on the ABC embroidery sheet, and fit the fabric and embroidery sheet into the frame. Clamp the frame with the carriage at the place indicated by "a". (see next page) ERROR MESSAGE TROUBLESHOOTING PATTERNS EMBROIDERING USING A SMALL FRAME (OPTIONAL) EMBROIDERING USING A EXTRA-SMALL FRAME (OPTIONAL) EMBROIDERING USING A LARGE FRAME (OPTIONAL) 4. After touching "LAYOUT", touch "90˚ clockwise" to change the arrow in the display so that it points to the right. Then touch "START/CENTER" to set the current needle position as the embroidery start position. 70