Brother International PR-600 Users Manual - English - Page 61

Sapphire_chapt2.fm Page 43 Tuesday, August 5, 2003 1:05 PM Stopping embroidering The machine can be stopped during sewing. ■ Temporarily pausing Press the start/stop button. 1 Press the thread trimming button. 2 X The machine stops and the start/stop button lights up in red. • The thread is not trimmed. • To continue sewing, after checking that the upper thread is taut, touch the unlock key, and then press the start/stop button. Memo ● If the Reserve Stop key is touched while embroidery is being sewn, the machine stops before sewing for the next color begins. (Refer to "Stopping the machine at the next color change" on page 90.) ● Before starting to sew, the machine can be set to stop at any thread color change. (Refer to "Specifying pause locations before embroidering" on page 90.) ■ Resume sewing after the machine was turned off Press the start/stop button. 1 X The embroidery machine stops and the start/stop button lights up in red. • The thread is not trimmed. X The bobbin and upper threads are trimmed. 2 • Before turning off the embroidery machine, be sure to trim the threads. Set the main power switch to "{". 3 1 2 X The embroidery machine is turned off and 3 the display and the start/stop button indicator go off. 4 • Sewing can resume after the embroidery machine is turned on again. Back up several stitches to overlap the stitching. For details, 5 refer to "Resume Embroidering After Turning Off the Machine" on page 81. 6 Memo 7 ● The machine can be stopped at any time, even while it is embroidering; however, if the machine is stopped when the thread 8 color is changed, it is not necessary to go back through the stitching when 9 embroidering is continued. The machine can be set to stop when the thread color is changed. (For details, refer to "Specifying 10 pause locations before embroidering" on page 90.) 11 ■ If the thread breaks while sewing 12 If a problem occurs while sewing, such as if the thread breaks, the machine stops automatically. Re-thread the broken thread, back up several 13 stitches, and then continue sewing. For details, refer to "If the Thread Breaks or the Bobbin 14 Thread Runs Out While Embroidering" on page 77. Sewing the Embroidery 43