Brother International PR-650 Operation Manual - Page 93
Hooping the Fabric
View all Brother International PR-650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Hooping the Fabric Hooping the fabric in the extra-large and large embroidery frames Loosen the screw on the outer frame. 1 and then lightly pull the fabric in the direction indicated by arrow D and insert corner D. • Be sure that there are no wrinkles in the fabric after it is stretched in the embroidery frame. While stretching the fabric even more, 4 securely tighten the screw so that the fabric is taut. 3 1 Screw Place the fabric with right side up on top of 2 the outer frame. • The outer frame does not have a front or back side. Either side can be used as the front. Press the inner frame into the outer frame. 3 First insert the inner frame at the corner with the screw A, next insert the nearby one corner B, and then insert the opposite corner C. Then insert the opposite corner of non screw corner D. • After stretching the fabric, lightly tapping it should produce a drum-like sound. • Firmly clamp together the inner and outer frames so that their tops are even. 1 Outer frame 2 Inner frame 3 Right side of fabric 4 Top of inner and outer frames are even • Using the included disc-shaped screwdriver, firmly tighten the screw. First, align the inner and outer frames at the corner with the screw A. Then, while lightly pulling the fabric in the direction indicated by arrow B so that the fabric is taut, insert the inner frame at corner B. In the same way, lightly pull the fabric in the direction indicated by arrow C and insert corner C, 1 Disc-shaped screwdriver Memo ● To correctly frame the fabric in the embroidery frame, we recommend using a flat surface. Hooping the Fabric 91