Brother International PT-1600 Users Manual - English - Page 68
Of Lines! 3 Max, Check Setting - pt to mm
UPC - 012502608073
View all Brother International PT-1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Error Message CHECK SETTING IN LABEL TYPE MODE! On 3/4" (18 mm) tape: CHECK THE NUMBER OF LINES! 5 MAX On 1/2" (12 mm) tape: CHECK THE NUMBER OF LINES! 3 MAX On 3/3" (9 mm) and 1/4" (6 mm) tape: CHECK THE NUMBER OF LINES! 2 MAX CHOOSE COPIES LESS THAN 1000! CUTTER ERROR! IMAGE CHARACTER SIZE ERROR! (for PT-1650 only) INPUT WHOLE CODE! Cause • This message appears if you try to change the settings for the Length function or Frame function after a Label Type mode with a preset label length or frame has already been selected. • This message appears if you try to print or use the Preview function when the number of lines in the text is greater than the maximum possible for the installed tape. Solution • Select a different Label Type mode. • Reduce the number of lines or install a wider tape. • This message appears if more than 1000 copies were selected with the Print Option functions. • Note the number of copies plus the number of sequential labels cannot exceed 1000. • This message appears if the tape cutter button was pressed in when p was pressed or the tape was being fed. • This message appears if a wide user-defined character image is entered when the Vertical Label Type mode is selected. • This message appears if the required number of digits is not entered in the bar code data. • Select less than 1000 copies. • Release the tape cutter button. If p was pressed, press f to feed out any printed tape. • If the problem cannot be corrected, contact your service representative. • Change the Label Type mode or use a tall userdefined character image. • Input the correct number of digits or change the bar code protocol. 60