Brother International PT 2110 Users Manual - English and Spanish - Page 37

z EDITING A LABEL Setting Character Attributes Setting Character Attributes by Label Using the key, you can select a font and apply size, width, style, line, and alignment attributes. 1 Press the key. The current settings are displayed. 2 Select an attribute using the or keys, and then set a value for that attribute using the or keys. 3 Press the or key to apply the settings. New settings are NOT applied if you do not press the or key. • Press the key to return to the previous step. • Press the key to set the selected attribute to the default value. • Refer to the Setting Options table for a list of all available settings. • Small characters may be difficult to read when certain styles are applied (e.g. Shadow + Italic). Setting Character Attributes by Each Line When a label consists two or more lines of text, you can set different value of 1 character attributes (font, size, width, style, line and alignment) for each line. 2 Move the cursor to the line you wish to change the character attribute by using the or keys. Next, 3 press the key while holding down key to display the attributes. ( on the screen indicates that you are 4 now applying the attribute for that specific line only.) 5 When different value of attribute is set for each line, the value 6 will be displayed as **** when you press the key. When you change the setting on this screen by using the or keys, 7 the same change will be applied to all lines of the label. 8 9 31 Setting Character Attributes