Brother International QL-1050N Users Manual - English - Page 32

Appendix, Controlling with the ESC/P Commands, Available Commands, Serial Cables

Get Brother International QL-1050N - P-Touch B/W Direct Thermal Printer PDF manuals and user guides
UPC - 012502616764
View all Brother International QL-1050N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Introduction Creating Labels Appendix Controlling with the ESC/P Commands Fonts and several bar codes are embedded within this machine. You can send commands to print embedded characters and barcodes. Available Commands Commands available are P-touch proprietary commands based on ESC/P. For details, see the "Command Reference" included in the CD-ROM. ([CD Drive]:\Doc\Technical) Serial Cables The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is longer than 6 feet (2.0 meters). Brother QL-1060N side (D-sub female, lock screw #4-40 inch screw) PC side (D-Sub9P female) Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI Pin Number 1 2 3 4 5 6 7 8 9 Pin Assignments Pin Number 1 2 3 4 5 6 7 8 9 Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI The RS-232C serial connector part of this equipment is not Limited Power Source. Appendix 32 Available Commands

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Introduction
Creating Labels
Appendix
Available Commands
32
Appendix
Fonts and several bar codes are embedded within this machine. You can send commands to print embedded
characters and barcodes.
Available Commands
Commands available are P-touch proprietary commands based on ESC/P.
For details, see the "Command Reference" included in the CD-ROM.
([CD Drive]:\Doc\Technical)
Serial Cables
The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown
in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is
longer than 6 feet (2.0 meters).
Brother QL-1060N side
PC side
(D-sub female, lock screw #4-40 inch screw)
(D-Sub9P female)
Controlling with the ESC/P Commands
The RS-232C serial connector part of this equipment is not Limited Power Source.
Signal
Name
Pin
Number
Pin Assignments
Pin
Number
Signal
Name
DCD
1
1
DCD
RXD
2
2
RXD
TXD
3
3
TXD
DTR
4
4
DTR
GND
5
5
GND
DSR
6
6
DSR
RTS
7
7
RTS
CTS
8
8
CTS
RI
9
9
RI