Brother International SB170 Operation Manual - Page 25
Blind hem stitching
![]() |
View all Brother International SB170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Blind hem stitching Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Stretch Blind 14 Hem Stitch 2 (1/16) 5 (3/16) Use a chalk to mark on the fabric about 3 5 mm (3/16 inch) from the edge of the fabric, and then baste it. 3 1 5 2 1 Wrong side of 4 fabric 2 Right side of fabric 3 Edge of fabric 4 Basting stitching 6 5 5 mm (3/16 inch) 6 Desired edge of hem Memo 1 2 ● When the size of cylindrical pieces is too small to slide onto the arm or the length is 1 2 too short, the fabric will not feed and desired results may not be achieved. Fold back the fabric inside along the 3 Reverse the skirt or pants. 1 2 4 basting. 2 4 1 Wrong side of fabric 2 Edge of fabric 1 3 4 1 Wrong side of fabric 2 Right side of fabric 3 Bottom side 4 Edge of fabric Fold the fabric along the desired edge of 2 the hem, and press. 5 16 1 1 3 Basting 3 4 5 mm (3/16 inch) 5 Desired edge of hem 6 Right side of fabric 7 Basting point 7 2 1 1 Wrong side of fabric 2 Right side of fabric 4 3 Edge of fabric 4 Desired edge of hem 1 32 1 2 3 Unfold the edge of fabric, and position the 5 fabric with the wrong side facing up. 5 1 3 1 1 1 1 Wrong side of fabric 2 Right side of 4 fabric 3 Basting 4 Edge of fabric 5 Desired edge of hem 6 Basting point 6 1 2 Remove the flat bed attachment and make 6 free-arm sewing possible. • For details on free-arm sewing, refer to "Stitching cylindrical pieces" (Page 20). 24
![](/manual_guide/products/brother-international-ps100-operation-manual-218e593/25.png)