Brother International SB3129 Operation Manual - Page 142
Be sure that the shuttle is correctly
View all Brother International SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
APPENDIX Use the cleaning brush or a vacuum cleaner to 5 remove any lint and dust from the race and its surrounding area. Insert the tabs on the needle plate cover into 7 the needle plate, and then slide the cover back on. 1 2 1 Cleaning brush 2 Shuttle race • Do not apply oil to the shuttle. Insert the shuttle so that the S mark on the 6 shuttle aligns with the z mark on the machine. a b a b CAUTION ● Never use a shuttle that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new shuttle (part code: XC3153-321), contact your nearest authorized service center. ● Be sure that the shuttle is correctly installed, otherwise the needle may break. • Align the S and z marks. c 1 S mark 2 z mark 3 Shuttle • Make sure that the indicated points are aligned before installing the shuttle. 136