Brother International SB3129 Operation Manual - Page 147
Error messages
View all Brother International SB3129 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Error messages If the start/stop button is pressed before the sewing machine is correctly set up or if an operation is performed incorrectly, an error message appears in the LCD. Follow the instructions that appear. If you press (OK key), (back key) or do the operation correctly while the error message is displayed, the message disappears. Error Message Probable Cause The motor locked up because the thread is tangled. The start/stop button, reverse/reinforcement stitch button or thread cutter button was pressed while the presser foot was raised. The reverse/reinforcement stitch button, needle position button or thread cutter button was pressed while the bobbin winder shaft is moved to the right. The start/stop button was pressed while the foot controller was connected. A stitch other than the buttonhole, bar tack or darning stitch was selected and the start/stop button was pressed while the buttonhole lever is lowered. 4 The buttonhole, bar tack or darning stitch was selected and the start/stop button was pressed while the button- hole lever is raised. The start/stop button or reverse/reinforcement stitch button was pressed after a stitch has been deleted. A pattern is being stored. The bobbin winder is winding the bobbin. F01~F09 More than 71 patterns are being combined. The start/stop button was pressed without connecting the foot controller while the setting for adjusting the stitch width using the sewing speed controller is set to [ON]. The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected. The first pattern was selected while two or more patterns are combined. The selected setting cannot be changed with the selected pattern. If error message "F01" through "F09" appears in the LCD while the sewing machine is being used, the machine may be malfunctioning. Contact your nearest authorized service center. Troubleshooting 141