Brother International SB8000 Operation Manual - Page 80
Follow steps
View all Brother International SB8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
UTILITY STITCHES Select the stitch type. c When a decorative stitch is selected X The screen containing the various stitches in the selected stitch type appears. • To select a different stitch type, press (Back key). Press the stitch selection. d (Previous page key) displays the previous screen, and (Next page key) displays the next screen. If necessary, specify the setting for automatic e reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, begin on page 81. Note z When a stitch is selected, the icon for the presser foot that should be used appears on the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Memo z For details on adjusting the stitch width and length, refer to "Adjusting the stitch width" (page 58) and "Adjusting the stitch length" (page 59). kj ■ Selecting characters Three styles of character stitches are available. The procedure for selecting a character is the same with all styles. Follow steps a and b in "Selecting stitching" a (page 77) to display the screen where a stitch type can be selected. Select the character style. b i a h b g cd ef a Decorative stitch selection b Set width, length and tension c Large pattern size d Small pattern size e Single stitch sewing f Repeat sewing g Horizontal mirror image h Delete a selected pattern i Check combined pattern j Automatic thread cutting k Automatic reverse/reinforcement stitch • To select a different stitch, press to remove the selected pattern. 78 Select the characters. c • If a wrong character was selected, press to erase the character, and then select the correct character. • To select a different character style, press , and then select the new character style. • Press to view a sample of the selected pattern. • To enter a space, press "_".