Brother International SC9500 Users Manual - English - Page 50

UTILITY STITCHES BLIND HEM STITCHING Pattern Presser Foot 100 stitches model 90 stitches model 80 stitches model 70 stitches model 60 stitches model 50 stitches model 40 stitches mod Twin Needle Walking Foot Reverse (Rev.)/ Reinforcement (Rfc.) Stitching You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing. Pattern No. Stitch Width Stitch Length [mm (inch.)] [mm (inch.)] Stitch Name Application Auto Manual Auto Manual Blind hem stitch R 10 10 10 09 09 09 09 Blind hem stitching on medium weight fabrics R 11 11 11 10 10 10 10 Blind hem stitching on stretch fabrics 0 (0) -3← →3 2.0 (1/16) 1.0-3.5 (1/16-1/8) No No Rfc. 0 (0) -3← →3 2.0 (1/16) 1.0-3.5 (1/16-1/8) No No Rfc. CAUTION ● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing. Memo ● When selecting stitch or . Stitch numbers "0", "-1", "-2" or "-3" may be displayed on the LCD by pressing "-" side of the stitch width adjustment key, then the needle drop point will be changed to the left. Stitch numbers "0", "1", "2" or "3" may be displayed on the LCD by pressing "+" side of the stitch width adjustment key, then the needle drop point will be changed to the right. ● When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not be achieved. Reverse the skirt or pants. a 2 1 4 3 a Wrong side of fabric b Right side of fabric c Edge of fabric d Bottom side Fold the fabric along the desired edge of the b hem, and press. 2 1 a Wrong side of fabric b Right side of Fabric c Edge of fabric 4 d Desired edge of hem 13 2 1 2 3 48