Brother International XR3140 Operation Manual - Page 17
Sewing speed controller, Changing the needle stop, position, Changing the initial needle
View all Brother International XR3140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Sewing speed controller Changing the initial needle position Slide the sewing speed controller to the left or a right to select the desired sewing speed. Slide the sewing speed controller to the left to Normally, the straight stitch (left needle position) is automatically selected when the sewing machine is 1 sew at a slower speed, or slide the speed turned on. The machine can be set so that the controller to the right to sew at a faster speed. straight stitch (center needle position) is automatically selected when it is turned on. Turn off the sewing machine. a a Sewing speed controller • The speed set using the sewing speed controller is the foot controller's maximum sewing speed. Changing the needle stop position Normally, the sewing machine is set to leave the needle in the fabric when sewing is stopped. Instead, the machine can be set to leave the needle raised when sewing is stopped. Turn off the sewing machine. a Hold down the "-" side of (stitch selection b key) on the left and turn on the sewing machine. After turning on the sewing machine, release the "-" side of (stitch selection key). Hold down the "+" side of (stitch selection b key) on the left and turn on the sewing machine. After turning on the sewing machine, release the "+" side of (stitch selection key). X The initial needle position changes to the center needle position. Memo ● The specified initial needle position is maintained even after the machine is turned off. ● Perform the same operation to change the initial needle position to the left needle position. X The needle stop position changes to the raised position. Memo • Perform the same operation to change the needle stop position to the lowered position. 15