Brother International XR9550 Operation Manual - Page 48
Shell tuck stitching, Joining, Heirloom stitching
View all Brother International XR9550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
UTILITY STITCHES Shell tuck stitching The gathers that look like shells are called "shell tucks". They are used to decorate trims, the front of blouses or cuffs made of thin fabrics. 1 Fold the fabric along the bias. 2 Attach zigzag foot "J". 3 Select stitch , and then increase the thread tension. • For details, refer to "Selecting a stitch" (page 25). 4 Sew while making sure that the needle drops slightly off the edge of the fabric. 1 1 Needle drop point 5 Unfold the fabric, and then iron the tucks down to one side. Joining Decorative bridging stitches can be sewn over the seam allowance of joined fabrics. This is used when making a crazy quilt. 1 Attach zigzag foot "J". 2 Sew together the right sides of the two pieces of fabric, and then open up the seam allowances. 46 2 1 3 1 1 Wrong side of fabric 2 6.5 mm (1/4 inch) seam allowance 3 Straight stitch 3 Select stitch , or . 4 Turn the fabric over so that the right side faces up, and then sew over the seam with the center of the presser foot aligned with the seam. 1 Right side of fabric Heirloom stitching When sewing with the wing needle, the needle holes are enlarged, creating a lace-like decorative stitch. This is used to decorate hems and tablecloths on thin or medium weight fabrics in addition to plain weave fabrics. CAUTION • The needle threader cannot be used with the wing needle, otherwise the sewing machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. For details, refer to "Upper threading" (page 16). 1 Insert the wing needle. • Use a 130/705H 100/16 wing needle. • For details on inserting a needle, refer to "Replacing the needle" (page 21). 2 Attach monogramming foot "N". 3 Select stitch or .