Brother International andtrade; QL-1060N Quick Setup Guide - English and Spani - Page 14
Parts Description, Main Printing Unit, Setting the DK Roll
View all Brother International andtrade; QL-1060N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
8 STEP1 Getting started 2 Parts Description Main Printing Unit Front DK Roll compartment cover LED lamp Rear ON/OFF button CUT button FEED button USB port Serial port LAN port Power cord 3 Setting the DK Roll 1 Press and hold the ON/OFF button to turn the QL-1060N off. Pull up the left and right levers on the machine under the top cover, and open the cover. 2 Put the spool into the spool guides in the DK Roll compartment. • Make sure that the spool arms are inserted firmly in the spool guides on the left and right. • Insert the spool with the DK Roll located on the right hand side of the QL-1060N.
STEP1 Getting started
8
Front
Rear
1
Press and hold the ON/OFF button to turn
the QL-1060N off. Pull up the left and right
levers on the machine under the top cover,
and open the cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
•
Make sure that the spool arms are inserted firmly in
the spool guides on the left and right.
•
Insert the spool with the DK Roll located on the right
hand side of the QL-1060N.
2
Parts Description
Main Printing Unit
FEED button
LED lamp
ON/OFF button
CUT button
DK Roll compartment cover
Power cord
USB port
LAN port
Serial port
3
Setting the DK Roll