Canon 1321B002 User Manual - Page 26
Connecting the Scanner to the Computer, Using a USB Connection, CAUTION
View all Canon 1321B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 2 Setup 2-4 Connecting the Scanner to the Computer There are two methods for connecting the DR-4010C scanner to a computer: USB connection, which makes use of a standard USB port on the computer, and SCSI connection, which makes use of a SCSI card installed in an expansion slot of the computer. Select the method that is suitable for your computer environment. SCSI ID DIP Switches Power Connector USB Connector SCSI Connector (half-pitch 50-pin, pin-type) CAUTION Do not connect a USB cable and SCSI cable at the same time. Using a USB Connection 1 Verify that the power switch of the scanner is OFF. If the power switch is in the ON position, push the switch to set it to OFF. Power switch OFF position ON position 2 Plug the supplied power cord into the power connector on the back of the scanner. a 2-11