Canon 1705B002 LV-7575_inst_manual.pdf - Page 17

BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP MODE INDICATOR Lights when the Lamp mode is set to "Silent" mode. (p.41) WARNING TEMP. INDICATOR Blinks red when the internal temperature of the projector is too high. (pp.46, 56-57) LAMP REPLACE INDICATOR Turns to orange when the projection lamp reaches its end of life. Blinks orange when the lamp cannot light up. (pp.48, 56-57) MENU BUTTON Used to open or close the On-Screen Menu. (p.18, 19) READY INDICATOR Lights green when the projector is ready to be turned on. And it blinks green in the Power management mode. (pp.40, 46, 56-57) LAMP INDICATOR Becomes dim when the projector is turned on. And it becomes bright when the projector is in stand-by mode. (pp.20-21, 56-57) POWER BUTTON Used to turn the projector on or off. (pp.20-21) INPUT BUTTON Used to select an input source. (pp.24, 31) LAMP MODE BUTTON Used to select a Lamp mode. (p.41) AUTO PC ADJ. BUTTON Used to operate the Auto PC Adjustment function. (p.26) LENS SHIFT BUTTON Used to select the Lens Shift function. (p.22) ZOOM BUTTON Used to adjust zoom. (p.22) POINT (VOLUME + / - ) BUTTONS Used to select an item or adjust a value in On-Screen Menu. They are also used to pan the image in the DIGITAL ZOOM +/- mode. (p.30) The POINT LEFT/RIGHT buttons are also used as VOLUME +/- buttons. (p.23) FOCUS BUTTON Used to adjust focus. (p.22) OK BUTTON Used to execute the selected item. It is also used to expand/compress the image in the DIGITAL ZOOM mode. (p.30) 17