Canon 1705B002 LV-7575_inst_manual.pdf - Page 31

VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control unit. If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below). MENU OPERATION INPUT button Input 1 Input 2 Input 3 ✽ Input 1 is not displayed when the Input 1 is used as Monitor out. WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS ) When connecting to video equipment, select a type of Video source in the Source Select Menu. INPUT MENU 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 2 Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 2 and then press the OK button. A Source Select Menu appears. 3 Move the pointer to a source that you want to select and then press the OK button. Video When the video input signal is connected to the VIDEO jack, select Video. Y, Pb/Cb, Pr/Cr When the video input signal is connected to the YPb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. NOTE: • INPUT SOURCE changes if the INPUT 2 button on the remote control unit is pressed. Input 2 INPUT Menu icon Move the pointer (red arrow) to Input 2 and press the OK button. Source Select Menu Move the pointer (red arrow) to Video or Y, Pb/Cb, Pr/Cr and press the OK button. WHEN SELECTING INPUT 3 (AV TERMINALS ) When connecting to video equipment, select a type of Video source in the Source Select (Video) Menu. INPUT MENU 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 2 Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 3 and then press the OK button. A Source Select Menu appears. 3 Move the pointer to a source that you want to select and then press the OK button. Video When the video input signal is connected to the VIDEO jack, select Video. Y, Pb/Cb, Pr/Cr When the video input signal is connected to the YPb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Input 3 INPUT Menu icon Move the pointer (red arrow) to Input 3 and press the OK button. Source Select Menu Move the pointer (red arrow) to a source and press the OK button. S-Video When the video input signal is connected to the SVIDEO jack, select S-Video. NOTE: • INPUT SOURCE changes if the INPUT 3 button on the remote control unit is pressed. 31