Canon 2099B002 User Manual - Page 99

ISIS Driver Quick Guide Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 User Preference Name and save your settings. ☞ Names can consist of up to 32 characters. 2 Mode Selects the scanning mode. ☞ [Text Enhanced] and [Advanced Text Enhancement 2] process the background of a document so the text is enhanced and easier to read. ☞ The Smoothing Gray/Color options used to smooth images and reduce moiré patterns are available when [400 dpi] Dots per inch or below is selected. 3 Page Size Selects the size of the pages to be scanned. ☞ Selecting [Auto-detection] causes automatic page size detection when scanning. 4 Dots per inch Selects scanning resolution. 5 Brightness Adjusts brightness of scanned images. [Brightness] is set automatically when the Text Enhanced mode is selected. 6 Contrast Adjusts contrast of scanned images. [Contrast] is set automatically when the Black and White or Text Enhanced mode is selected. 7 Scanning Side Specifies the side of the document to scan. ☞ When [Skip blank page] is selected, images are skipped if they are determined blank based on the [Ratio of black pixels] value. ☞ When [Folio] is selected, both sides of a document are scanned, and the images displayed are combined into one image. For details, refer to the user's guide. ☞ When the [Reverse side] check box is selected, a mirror image of the scanned document is displayed. ☞ [Ratio of black pixels] specifies the ratio of black areas (0 to 20%) when skipping blank pages. 8 Feeding Option Selects the document feeding method. ☞ [Standard Feeding] scans loaded documents after starting scanning from the application program. ☞ [Panel-Feeding] scans loaded documents after pressing the scanner's scan button. ☞ [Automatic Feeding] starts scanning whenever the scanner detects a loaded document. 9 Batch Separation This setting is enabled when the [Panel-Feeding] or [Automatic Feeding] Feeding Option is selected. Documents can be scanned as separate batches. ☞ When [Auto] is selected, batch separation is performed when scanning with [Panel-Feeding] or [Automatic Feeding] starts. ☞ When [Panel] is selected, batch separation is performed when the batch separation button in the Scan Panel is clicked. 0 Deskew When a document page feeds at a slant, the scanned image is straightened. A Prescan When scanning starts, a page of the document is scanned and its image is displayed in the Prescan window. Scan Area Dialog Box B Page Size Selects the size of the pages to be scanned. ☞ Click [Custom] to register a non-standard document size as a custom page size. C Area Specifies the area to be scanned. ☞ These settings are disabled when [Auto-detection] is selected for the Page Size. D Area Window The appearance of this window indicates the current Page Size setting. ☞ The specified scan area can be adjusted by dragging the mouse. Advanced Settings Dialog Box E Drop-out color Enabled for all scanning modes except [24-bit Color], this function selects skipping (drop-out) of red, green, or blue or enhancement of red when scanning the front or back of documents. F Gamma To alter the standard gamma curve, select [Custom] Gamma Data and change the gamma curve. For details on this setting, click the Help button. G Edge emphasis Enhances contours in scanned images. H Border Removal Removes the black border that may be created around scanned images. I Scanner Adjustment Scanner Adjustment is a function used to adjust the reference values of the scanner when abnormalities occur within the scanned images, and normal maintenance does not remedy the problem. For details on Scanner Adjustment, refer to "Adjusting the Scanner" (see P.75) in the user's guide. This Quick Guide describes the dialog boxes displayed by CapturePerfect. Depending on your application program, the basic setup dialog box may not be displayed. In this case, the Advanced Settings dialog box, which includes some of the functions in the basic setup dialog box, is displayed. Click the Help button for details.