Canon 2756B001 EOS DIGITAL REBEL XSi/EOS 450D Instruction Manual - Page 31
Installing and Removing the Card
UPC - 013803096071
View all Canon 2756B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing and Removing the Card The captured image is recorded onto the card (sold separately). Make sure the card's write protect switch is set upward to enable writing/erasing. Installing the Card 1 Open the cover. Slide the cover as shown by the arrow to open it. 2 Insert the Card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. Shots remaining 3 Close the cover. Close the cover and slide it in the direction shown by the arrow until it snaps shut. When you set the power switch to , the number of remaining shots will be displayed on the LCD monitor. The shots remaining depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. The [1 Shoot w/o card] menu option set to [Off] will prevent you from forgetting to install a card. (p.108) 31