Canon 9443a002 Instruction Manual - Page 162
Troubleshooting Guide
UPC - 013803046274
View all Canon 9443a002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. Power Source The battery cannot be recharged. ¡ You are using the wrong battery. s Use the dedicated Ni-MH Pack. (p.18) ¡ The battery is not properly attached to the charger. s Attach the battery properly to the charger. (p.18) The camera does not operate even when the switch is set to . ¡ The battery is exhausted. s Recharge the battery. (p.18) ¡ The battery is not installed properly. s Install the battery properly. (p.20) ¡ The memory card slot is open. s Push in the memory card and close the memory card slot. (p.24) The access lamp lights or blinks even when the switch is set to . ¡ If you set the switch to right after shooting, the access lamp will still light or blink for a few seconds while the image is recorded onto the memory card. s When the camera finishes recording the image to the memory card, the access lamp will stop blinking and the power will turn off. The battery becomes exhausted quickly. ¡ The battery is not fully charged. s Recharge the battery fully. (p.18) ¡ The battery's service life has expired. s Replace it with a new battery. (p.168) 162