Canon 9443a002 Instruction Manual - Page 41
Press the shutter button, completely., Cleaning the CMOS Sensor, Exit the sensor cleaning.
UPC - 013803046274
View all Canon 9443a002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4 Press the shutter button completely. s The mirror will lock up and the shutter will open. 5 Cleaning the CMOS Sensor ¡Use a rubber blower to carefully blow away any dust on the surface of the CMOS sensor. 6 Exit the sensor cleaning. ¡Turn the switch to . s The camera will turn off, the shutter will close, and the mirror will go back down. ¡Set the switch to . The camera will be ready to shoot. ¡ Be sure not to turn off the camera while cleaning the CMOS sensor. If the power is turned off, the shutter will close and the shutter curtains might be damaged. ¡ Use a blower not attached with a brush. The brush can scratch the CMOS sensor. ¡ Do not insert the blower tip inside the camera beyond the lens mount. If the power goes out, the shutter curtains will close and the blower tip may damage then. ¡ Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor. 41