Canon BU-47H operation manual - Page 31

3. Specifications 3-1. Camera unit Imaging sensor 1/3 type, 3CMOS, Effective pixels: 2.07 megapixels Mounted camera 4.1 to 73.8 mm F1.6 to 2.8, 7.4 to 134 mm (2/3" equivalent) 18x optical zoom, digital extender (x1.5) Focusing system AUTO, MANUAL IRIS AUTO, MANUAL Image stabilizer Optical shift type Shutter speed Model Signal Frame rate Shutter speed BU-47H 1AM NTSC 60i 1/4, 1/15, 1/60, 1/100, 1/1000 BU-47H 2AM PAL 50i 1/3, 1/12, 1/50, 1/100, 1/1000 Gain AUTO, 0, +6, +12, +18, +33dB White balance AUTO, Set ND filter 1/1, 1/4, 1/16, 1/64 (four-positions) Picture quality adjustment Master pedestal, R-Gain, B-Gain, R-BLK, B-BLK 3-2. Head unit (Pan-tilt section) Ambient operating conditions Temperature: -15 to +40°C, Humidity: 90%RH or less (non-condensing) Wind speed resistance 0 to 25 m/s: Operate normally, 25 to 35 m/s: Operable, 35 to 60 m/s: Not destroyed Control system Digital control Units controlled Pan-tilt head, lens and camera are controlled by means of commands from the operation unit. Power supply 10.5 to 15 VDC, 80 W Power of two or three times the rating 80 W may be consumed during power-on, so select a power supply with specifications that prevent a power failure. Wiper Provided MIC input Provided (Pedestal section) Washer Control terminal provided (Pedestal section) Pan-tilt head operations Operation angle Operation speed Panning -170° to +170°±5° 0.5°/s to 25°/s Tilting -50° to +30°±5° 0.3°/s to 20°/s Shot operations Pan/tilt/zoom/focus Stopping accuracy Less than 10' for both pan and tilt operations Dustproof and waterproof performance IP45 Acoustic noise NC55 or less Control cable RS-422 cable (Depending on the system configuration, other unit or cable may be required.) Receptacle DC, control (RS-422), SDI output, VBS output, SYNC input, AUX Video output • HD-SDI/SD-SDI (embedded audio) output, BNC1 system (receptacle section) * HD-SDI and SD-SDI outputs are switched by the internal setting. For details, please contact your Canon dealer. • SD composite output, BNC1 system (receptacle section) GENLOCK input BNC1 system (tri-value/BB) Pan-tilt head securing Mounted with four M8 bolts Dimensions Refer to the external view. Mass Approx. 17 kg (including the camera, excluding the optional units) E11