Canon BU-47H operation manual - Page 33

4-2. Control connectors ᶄᶅ ᶆ A-A section SDI START A UX STOP VBS ᶈ CONT SYNC ᶉ A ᶌ ᶋ Receptacle unit ᶊ A ᶃ ᶇ ① DC-IN This is an input terminal for DC power supply. ② LED This is lit when the power is on, and it is not lit when the power is off. ③ START switch This is the start switch. ④ AUX This terminal is used to control arbitrary functions. (HR10A-10R-10S (71)/HIROSE) For the pin assignment, refer to the separate installation manual. This can be used as a universal contact circuit. ⑤ CONT. This is an input terminal for the pan-tilt head, lens and camera control signals. (PRC05‑R12M/TAJIMI) For the pin assignment, refer to the separate installation manual. ⑥ SDI This is an output terminal for uncompressed digital video and digital audio signals. ⑦ VBS This is an output terminal for SD composite signals. ⑧ SYNC This is an input terminal for external sync signals. ⑨ Waterproof connector for MIC This is the control terminal for the microphone (option). ⑩ Waterproof connector for washer This is the control terminal for the washer (option). 4-3. Pan-tilt head, housing, lens, and camera operation The BU-47H main unit and built-in lenses and camera are controlled from the operation unit. The functions and operating procedures vary depending on the operation unit that is used. For further information, please refer to the operation manual of your operation unit. E13